INSIDE THE SYSTEM

Intelligence above.
Engineering underneath.

A drone is a network of decisions made in real time. The proposed X8 architecture separates critical flight control from companion processing, with deliberate interfaces between them.

PROPOSED SYSTEM ARCHITECTUREX8 / DEVELOPMENT STUDY
MISSION LAYER

Perception · Planning · Communications

Companion computing supports the mission while the local control loops remain responsible for attitude control.

BANK A

Flight controller A

Local sensors · dedicated regulation
Independent ESC output path

Battery A → four motors
BANK B

Flight controller B

Local sensors · dedicated regulation
Independent ESC output path

Battery B → four motors

Concept architecture. Independent supervision, common failure points, control allocation, and fault response require validation. Dual banks alone do not establish fault tolerance.

01 / CONTROL

Deterministic by purpose

The flight-control path is proposed around STM32N6 controllers and C firmware. Companion processing must not interrupt attitude control.

02 / PERCEPTION

From sensing to understanding

A proposed front-facing sensor package connects to onboard interpretation, with validated navigation requests passed to flight control.

Explore perception
03 / COMMUNICATIONS

Connections with a role

A stick-antenna module illustrates proposed drone mesh and ground-control links. Radio selection and routing remain under development; GNSS stays separate.

Explore communications

DESIGN QUESTIONS

Good architecture
invites scrutiny.

The design programme treats each interface and shared dependency as something to understand and test.

How do the two banks cooperate?

The proposal coordinates force and torque allocation and state estimates. Timeouts, stale data, and controller disagreement need defined responses so the controllers do not fight each other.

Does eight rotors guarantee redundancy?

No. Control authority, minimum battery voltage, thermal limits, sensor independence, and the effects of a failed rotor or bank must all be demonstrated for a defined aircraft mass.

Can the aircraft use only four motors?

Normal development assumes all eight motors are running. Any planned shutdown, restart, or bank-out mode is a separate qualification effort, with no efficiency or endurance gain assumed.

Where do performance claims come from?

From calibrated propulsion measurements, assembly mass, pack testing, and incremental flight validation. Research scenarios are not sale specifications.

WHAT COMES NEXT

See the architecture in context.

Explore the aircraft layout and current development status.

Back to stacked X8